Wired Vehicle Tracking Device

Function

Function Details

Function Description

Positioning monitoring

Scheduled upload

The terminal returns location information such as latitude and longitude to the server at set time intervals

Base station positioning

Determine the location of mobile devices through mobile communication base stations

Blind spot supplementary transmission

When encountering poor signal during terminal positioning, store positioning data and upload it normally when there is a signal. Up to 1000 blind spot

Curve supplementary transmission

When the vehicle enters a bend, the positioning terminal detects a certain angle deviation in the driving direction and will add a timed feedback message to ensure a more accurate driving trajectory.

Alarm

Power outage alarm

After the external power supply of the terminal detection device terminates, immediately report a power failure alarm to the platform

Low voltage alarm

After the terminal detects that the vehicle battery voltage is below 9V, it will provide a low voltage alarm feedback to the platform

Parking alarm

When the monitoring vehicle triggers the platform's no parking condition, the terminal provides feedback to the platform for a parking alarm

OVERSPEED

When the vehicle speed detected by GPS is greater than the maximum speed limit set by the platform or terminal, feedback an over speed alarm to the platform

Alarm for entering and exiting the area

When the vehicle detected by the terminal approaches the special area divided by the platform, it will provide the platform with feedback on the entry and exit area alarm function when entering and exiting

Abnormal alarm of positioning device

When the vehicle detected by the terminal approaches the special area divided by the platform, it will provide the platform with feedback on the entry and exit area alarm function when entering and exiting

more function

auto sleep

The host is equipped with a high-sensitivity G-sensor acceleration sensor, which can monitor whether the vehicle is in motion in real time. When no movement is detected for a long time, the host automatically enters a power-saving state, turns off the GPS/BD module, and the GSM enters a heartbeat feedback state. In this state, the device has extremely low power consumption, which can greatly reduce the loss of the vehicle battery

Intelligent self check

The vehicle terminal can perform self diagnosis. Once a fault occurs, it will send a fault notification to the center, such as the satellite positioning module, GSM module, etc., and can automatically take relevant measures. The monitoring center can also query the current model, version, configuration, operating status, and device functions of the terminal.

Mileage statistics

The terminal records and calculates the driving mileage, which can be uploaded to the platform for reference

Static drift suppression

The host is equipped with a high-sensitivity G-sensor acceleration sensor and a complete set of positioning data filtering algorithms, which can filter out most of the static drift data and ensure the accuracy of satellite positioning data.

Remote settings

Set various parameters of the terminal remotely through the central system, including IP, center number, various monitoring parameters, etc.

Remote Upgrade

Support remote upgrade for easy maintenance

Project

Technical Parameter

Working voltage

9VDC~90VDC

Working current

30mA~50mA(DC12V)

Positioning module

Support GPS+BD dual system positioning

Communication method

TCP

Communication network

GPRS

Locate mode

GPS+BD

Position error

<10m

Acceleration limit

Less than 4g

Time accuracy

Synchronize GPS time

Sensor

Precision vibration sensor

operation temperature

-20℃~70℃

Storage temperature

-30℃~85℃

Terminal size

86mm×37mm×15mm